home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 1
/
Cream of the Crop 1.iso
/
COMM
/
JMOD310.ARJ
/
UART.H
< prev
Wrap
Text File
|
1991-11-30
|
4KB
|
57 lines
/****************************************************************************/
/* FILE UART.H */
/* Created 11-JAN-1990 Richard B. Johnson */
/* 450 Broughton Drive */
/* Beverly, Massachusetts 01915 */
/* BBS (508) 922-3166 */
/* Parameters for the 8250 UART and hardware ports. */
/****************************************************************************/
#define BASE 0x00 /* Base port */
#define TX_BUF 0x00 /* Transmitter buffer */
#define RX_BUF 0x00 /* Receiver buffer */
#define IER 0x01 /* Interrupt enable register */
#define IIR 0x02 /* Interrupt ident register */
#define LCR 0x03 /* Line control register */
#define MCR 0x04 /* Modem control register */
#define LSR 0x05 /* Line status register */
#define MSR 0x06 /* Modem status register */
#define MCR_DTR 0x01 /* Data terminal ready */
#define MCR_RTS 0x02 /* Request to send */
#define MCR_OUT1 0x04 /* Control line 1 */
#define MCR_OUT2 0x08 /* Control line 2 (enable IRQ) */
#define MCR_LOOP 0x10 /* Loopback control bit */
#define MSR_DCTS 0x01 /* Delta clear to send */
#define MSR_DDSR 0x02 /* Delta data set ready */
#define MSR_TERI 0x04 /* Trailing edge ring indicator */
#define MSR_DSLSD 0x08 /* Delta receive line signal */
#define MSR_CTS 0x10 /* Clear to send */
#define MSR_DSR 0x20 /* Data set ready */
#define MSR_RI 0x40 /* Ring indicator */
#define MSR_RLSD 0x80 /* Received line signal detect */
#define LSR_DR 0x01 /* Data ready */
#define LSR_OR 0x02 /* Overrun error */
#define LSR_PE 0x04 /* Parity error */
#define LSR_FE 0x08 /* Framing error */
#define LSR_BI 0x10 /* Break interrupt */
#define LSR_THRE 0x20 /* Trans holding register empty */
#define LSR_TSRE 0x40 /* Trans shift register empty */
#define LSR_NOP 0x80 /* Not used */
#define IER_ERBFI 0x01 /* Enable Recev data available */
#define IER_ETBEI 0x02 /* Enable Trans holding empty */
#define IER_ELSI 0x04 /* Enable Recev line status */
#define IER_EDSSI 0x08 /* Enable Modem status */
#define IIR_MOD 0x00 /* Modem status */
#define IIR_IP 0x01 /* Interrupt pending */
#define IIR_THE 0x02 /* Tx holding register empty */
#define IIR_RDA 0x04 /* Received data available */
#define IIR_RLS 0x06 /* Receiver line status */
#define MSR_CHK (MSR_DSR | MSR_CTS | MSR_RLSD)
#define MOD_ENA (MCR_DTR | MCR_RTS | MCR_OUT2)
/****************************************************************************/
/*********************** E N D O F M O D U L E ***************************/